Gas Lines and Game Days: The Fall Upgrade Prosper Homeowners Are Booking Before the First Cold Front

There’s a specific moment every North Texas homeowner knows. It’s the third quarter, the grill’s got a full load on it, and the burner starts dropping off. Everybody looks at everybody. Somebody grabs keys and goes hunting for a propane exchange cage.

That moment is why our phone starts ringing about gas lines in September.

Fall is the season this part of Texas actually gets to use its backyard. September still runs hot here, with a normal high around 88 degrees at DFW, but the evenings turn. The first strong cold front usually shows up in the middle of October, which means right now you’ve got roughly a month of good weather and a very good reason to finally run gas to the grill, the fire pit, the pool heater, or the lanterns you’ve been thinking about for two years.

And gas work is different from most plumbing. It’s permitted, it’s inspected, it gets pressure tested, and it’s the one thing in your house where the phrase “close enough” has no place at all. So here’s the honest walkthrough: what we can run a line to, what the process looks like, what code actually requires, and how to tell if something’s wrong. No pressure, no scare tactics. Grab a cup of coffee, the good kind, and let’s get into it.

TL;DR,

• A dedicated gas line means your grill, fire pit, pool heater, or gas lanterns never run out of fuel in the middle of a cookout.
• Crown runs gas lines to barbecues, fire pits, pool and hot tub heaters, fireplaces, lanterns, ranges, cooktops, clothes dryers, water heaters, furnaces, and commercial restaurant equipment.
• Gas work in Prosper and the surrounding cities requires a permit, an inspection, and a pressure test, typically 3 psi held for at least 10 to 15 minutes, depending on your city.
• Every gas appliance is supposed to have its own shutoff valve in the same room, within 6 feet, and reachable. Most homeowners have never found theirs.
• We’re licensed and insured, certified in LPG for propane work, and family-owned in Prosper since 2006 with 4.9 stars across 957 reviews.
• Free estimate, fixed price. Call (972) 346-2332 or book at crownplumbingservice.com.

What Does It Take to Add a Gas Line to a Grill, Fire Pit, or Pool Heater in Prosper, TX?

Adding a gas line is a permitted job that starts with math, not a shovel. A licensed plumber checks whether your existing gas service and meter can carry another appliance, sizes the new pipe for the distance it has to run and the demand at the end of it, pulls the permit with your city, runs the pipe in an approved material, installs a dedicated shutoff valve within 6 feet of the appliance, pressure tests the whole system, and has a city inspector verify it before anything gets covered up. Most straightforward backyard runs are a one-day job. The part that trips people up is capacity: a house that was built for a furnace, a water heater, and a range doesn’t automatically have room for a 60,000 BTU pool heater on top of it. That’s the first thing we check, and it’s free to have us come look. Call Crown Plumbing at (972) 346-2332 or schedule at crownplumbingservice.com.

Now, the part with the details.

Fall Is Quietly the Best Gas Line Season in North Texas

Summer gets all the attention around here because summer is when things break. Fall is different. Fall is when people build.

The weather cooperates for the first time since May, which matters more than you’d think on a job that involves digging a trench across a yard. Nobody’s thrilled about hand-digging in 103 degrees, and honestly, the work goes better when it isn’t brutal outside. October also brings the rain back, averaging over four inches at DFW compared with September’s two and change, so getting the trench work done before the ground turns is genuinely easier on everyone.

Then there’s the calendar. Football starts, people host again, and the patio stops being a place you look at through a window. The Houzz 2026 Outdoor Trends Study found that 68 percent of outdoor projects involve plumbing, electrical, or heating systems, and that 71 percent of homeowners hire a professional for that work, up from 65 percent two years earlier. Those aren’t Prosper numbers specifically, but they match what we see: people are building real outdoor spaces now, not setting a grill on a slab and calling it a patio.

The last piece is the heating season. Once that mid-October front lands, your furnace and your water heater start working for a living again, and both of those run on the same gas system we’re already out there touching. Doing it all in one visit in September beats scheduling three separate visits in December.

What a Gas Line Actually Is, and Why It Isn’t a Saturday Project

A gas line is a pressurized pipe carrying fuel into and around your house. That’s the whole description, and it’s also the whole reason it gets treated differently from a water line.

If a water line leaks, you get a wet floor and a phone call. If a gas line leaks, you get something else. So the entire system, from the utility’s meter to the last shutoff valve, is governed by code, permitted by your city, and inspected by somebody whose job is to catch what the installer missed. Texas regulates it in two directions at once: natural gas piping falls under plumbing licensing, and propane falls under the Railroad Commission of Texas, which is why a plumber has to hold separate credentials to touch LP gas. We hold both. Our license number is M-37627, and we’re certified in LPG.

The part people underestimate isn’t the pipe. It’s the sizing, the material, the bonding, the trap placement, the valve placement, and the test. Any one of those done wrong will pass a casual glance and fail an inspection, or worse, pass an inspection and fail later. Which is the long way of saying: this is the job to hire out. And it’s one of the few where the permit itself is doing something for you, because it puts a second set of trained eyes on the work before it disappears behind drywall or under sod.

If you want the service page version, it’s here: gas line installation and service.

The Backyard List: What We Can Run a Line To

This is the question we get most, so here’s the plain answer.

The grill

The most requested line in this town by a wide margin. A dedicated barbecue line ends the propane tank cycle permanently. Your grill needs to be a natural gas model or converted to one with a manufacturer’s kit, and we run the line to a stub-out with a shutoff and a quick-connect so you can still roll the grill out of the way when you need to. The Houzz study found 85 percent of outdoor kitchen projects include a grill, which surprises exactly nobody in North Texas.

The fire pit

A gas fire pit lights with a switch or a key valve and goes out the same way. No hauling wood, no smoke chasing your guests around the patio, no waiting forty minutes for coals to die down before you can go to bed. Just about half of outdoor lounge areas now include a fireplace or fire pit according to that same Houzz research, and around here it’s the upgrade that turns a patio into a place people actually sit in November.

Pool and hot tub heaters

This is the one with a deadline. A pool heater is a big-draw appliance, often the largest single gas load anyone adds to a house, and it’s also the one people wait too long on. If you want to swim past October, the line needs to go in before the water gets cold, not after. Hot tub heaters are the same story on a smaller scale, and a hot tub in a North Texas January is a genuinely excellent decision.

Gas lanterns and outdoor fireplaces

Lanterns are a small line and have a big effect. They’re on the list of appliances we run gas to, they sip fuel compared with everything else on this page, and they change how the front of a house looks at night. Outdoor fireplaces are the bigger cousin, more common on covered patios, and they need the same permitted treatment as anything else.

One note worth saying out loud: we run the gas. We’re not the ones building the pergola or laying the stone. If you’re working with a patio builder or a landscape contractor, get in early so the line goes in before the hardscape does. Retrofitting gas under a finished flagstone patio is possible. It’s just a shame.

The related service page is backyard plumbing upgrades, which covers the water side of the same projects.

Why a Grill Line Beats the Propane Tank Shuffle

Let’s be specific about what actually changes, because “convenience” is a soft word and this is a concrete improvement.

You stop guessing. A tank gives you no warning and no gauge you can trust, so you either keep a spare in the garage or you accept that one day it dies mid-brisket. A plumbed line doesn’t run out. Ever.

You stop driving. Every exchange run is twenty minutes and a swap fee, and you’re trading your tank for whatever somebody else abandoned.

You cook more. This is the part people report back to us. When firing up the grill costs nothing but turning a valve, it stops being a weekend event and starts being a Tuesday.

And you clear the garage of a pressurized cylinder, which is a small safety win nobody asks for and everybody appreciates.

The tradeoff is honest: your grill stays where the line is. If you move it around the yard constantly, or you take it camping, a tank still makes sense. Most people don’t.

Planning an Outdoor Kitchen? Here’s the Part We Handle

Outdoor kitchens have gotten serious in Collin County. The Houzz research found 95 percent of them are built from scratch rather than refreshed, and the feature lists keep growing: sinks in 59 percent of them, beverage fridges in 62 percent, cook tops in 36 percent.

Our lane is the gas and the water. We run the line to the grill or the built-in burner; we set the shutoff, and on the plumbing side we can run supply and drainage to an outdoor sink. The cabinetry, the countertop, the stonework, and the electrical belong to other trades, and we’d rather tell you that plainly than pretend otherwise.

What we will do is tell you early whether the plan works. The most common surprise on an outdoor kitchen isn’t the price of the appliances. It’s finding out in week three that the house doesn’t have the gas capacity to run a 60,000 BTU built-in burner, a side burner, and a pool heater at the same time as the furnace. That’s a fifteen-minute conversation in September and a very expensive conversation in November.

Inside the House: Ranges, Cook Tops, Dryers, and Fireplaces

Not every gas line project is outside.

Gas ranges and cook tops: The most common indoor request, usually from somebody who’s been cooking on electric and is finished with it. If your kitchen was plumbed for gas originally, the line may already be capped behind the range. If it wasn’t, we run one. Fall is remodel season for a reason, and if the kitchen’s already open, this is the moment.

Clothes dryers: A gas dryer costs less to run and dries faster than an electric one. Converting a laundry room that was built electric-only means running a line and setting a shutoff, and it’s usually a shorter run than people expect.

Fireplaces: Gas logs and gas inserts are on the list. A working fireplace changes how a house feels from Thanksgiving through February, and if yours has been decorative since you moved in, this is a fixable problem.

Water heaters and furnaces: Both already run on gas in most homes here, which means both are already tied into the system we’re testing anyway. More on those next.

The Furnace and the Water Heater, Before the Front Gets Here

Here’s a thing worth knowing about how fall works in this business.

Your furnace has been sitting idle since roughly March. Your water heater has been coasting through a summer where the incoming water was already warm and it barely had to work. Then the first front lands in mid-October, everybody turns the heat on the same week, and everybody discovers the same problems at the same time.

When we’re at your house running a new line, the gas system we pressure test includes the water heater and the furnace connections. That means the visit you booked for a fire pit doubles as a check on the two appliances that are about to start earning their keep. We’ll tell you if a connector looks tired or a shutoff won’t turn, and we’ll tell you if everything’s fine, which is the more common answer.

If your water heater’s getting up in years, September is a much better month to deal with it than December. Nationally, water heater search interest jumps meaningfully into November, which is the polite way of saying that’s when they fail. We handle water heater installation and tankless water heater installation, and a tankless conversion in particular is a gas job as much as a water job, because the unit usually needs a larger gas line than the tank it replaces.

How Much Gas Does Your House Actually Have?

Every house has a gas budget. Nobody tells you the number when you buy the place.

Your gas meter and your service line were sized for the appliances the builder installed. In a typical Prosper-area home, that’s a furnace, a water heater, maybe a range, maybe a dryer. Add up their BTU ratings, and you get the demand the system was designed around, with some margin built in.

Now add a pool heater. Those routinely pull 250,000 to 400,000 BTU, which can be more than everything else in the house combined. Add a built-in grill at 60,000 or more, a fire pit, a couple of lanterns. It adds up faster than people expect, and the symptoms of an undersized system are sneaky: a furnace that short-cycles, a water heater that can’t keep up when the pool heater runs, a grill that never quite gets hot on a cold night.

This is why the first thing we do is a load calculation, not a shovel. We add up what’s there, add what you want, look at your meter and your service pressure, and tell you one of three things: it fits, it fits if we upsize a section of pipe, or the meter needs to be upgraded by the utility. All three are workable. Knowing which one you’re in before the project starts is the difference between a smooth job and a mess.

How Do I Know If My Gas Line Is Big Enough for One More Appliance?

You don’t, from looking at it, and neither does anyone else. Pipe size alone won’t tell you, because capacity depends on the diameter, the total length of the run, the number of fittings, the delivery pressure, and the combined demand of everything already on the system.

What you can do is gather the information that makes our visit faster. Find the BTU rating on the appliance you’re adding, usually on a plate or in the manual. Note roughly how far it sits from the meter. And if you already notice something odd, like the hot water going lukewarm whenever the furnace kicks on, mention it. That’s data.

Then let us do the calculation. It’s free, it takes one visit, and you get a straight answer.

What If My House Doesn’t Have Gas at All?

It happens more than you’d think, particularly on all-electric builds and on properties past the edge of the utility’s distribution.

If there’s a gas main in your street, the utility runs the service line to a meter on your house, and we take it from there. That’s a coordinated job with a timeline set partly by the utility, so it isn’t a same-week project, and starting it in September rather than November is the difference between a fall install and a spring one.

If there’s no main, propane is the answer, and it’s a good one. A tank gets set on the property, we run the piping, and your fire pit and grill work exactly the same way they would on natural gas. This is common out toward Celina, Melissa, Anna, and on the larger lots around Prosper. Because propane sits under the Railroad Commission rather than the plumbing board, it takes a plumber with LPG credentials to do it, which is a shorter list than you’d expect. We’re on it.

Either way, the first step is the same. We come look, and tell you which situation you’re in.

New Build or Twenty Years Old? What Changes

Our service area covers two very different housing stocks, and the gas conversation goes differently in each.

Newer homes, and Prosper and Celina have added a lot of them, tend to be plumbed tight to spec. The builder sized the system for the appliances that went in and not much more, and the yard is compact enough that runs are short. What you often find is CSST in the attic, a meter with modest headroom, and no stub-outs left for future use. Adding a pool heater to one of these usually means a real capacity conversation. The good news is that the routing is easy and the records are recent.

Older homes in Plano, McKinney, and Allen are the opposite. They’re more likely to have black iron throughout, sometimes with sections that have been added onto over the decades by three different people. Capacity is occasionally better than expected because older systems were sized generously. What we watch for instead is corrosion at buried transitions, valves that haven’t been turned since the Clinton administration, and connectors well past their service life.

Both get the same treatment: measure what’s actually there, calculate the load, and price the real job. The reason we bring this up is that a neighbor’s quote is a poor benchmark. Two houses on the same street, built eight years apart, can need genuinely different work for the same fire pit.

What Does a Gas Line Installation Actually Look Like, Step by Step?

People like knowing what’s going to happen in their yard. Fair enough.

1. The free estimate: We come out, look at the meter, look at where the appliance is going, measure the run, do the load calculation, and give you a fixed price. Our price doesn’t change between the estimate and the invoice. What we quote is what you pay.
2. The permit: We pull it with your city and schedule the inspection. This isn’t a step to skip, and we’ll get to why.
3. The route: We plan the path with the shortest practical run and the fewest fittings, working around irrigation lines, the slab, tree roots, and anything else in the way. Sometimes that means the obvious straight line isn’t the one we take.
4. The trench or the chase: Outdoor runs get buried at the required depth. Indoor runs go through walls, attics, or crawl spaces depending on the house.
5. The pipe: Approved material, properly supported, correctly sleeved where it needs to be, with a shutoff valve at the appliance end and a sediment trap where code calls for one.
6. The pressure test: The gauge goes on, the system gets pressurized, and it has to hold. More on this below, because it’s the best part.
7. The inspection: The city inspector verifies the work before anything gets covered. This is the whole point of the permit.
8. Backfill, connect, and light: We close it up, connect the appliance, purge the line, light it, and check for leaks at every joint with a solution or a detector. Then we show you your shutoff valve and make sure you can find it again.
9. Cleanup: Your yard should look like we were never there, minus the new fire pit.

Do I Need a Permit to Run a Gas Line in Prosper, TX?

Yes. And in Celina, McKinney, Frisco, Allen, Plano, and everywhere else we work.

Cities treat gas piping as permitted work because it has to be inspected before it’s concealed. McKinney, for one, lists plumbing and gas permits explicitly among the home repairs that require one. The specifics vary from city to city, including which edition of the code they’ve adopted. Frisco moved to the 2024 International Plumbing Code and 2024 International Fuel Gas Code effective March 1, 2026, which is newer than some of its neighbors. That kind of difference is exactly why “my buddy did it at his house in another city” is not a reliable guide.

Here’s what we’d want you to know about permits. An unpermitted gas line is a problem that waits. It surfaces when you sell the house and the buyer’s inspector finds it, when an insurance adjuster asks questions after a claim, or when a future plumber has to work on a system nobody ever verified. The permit costs some time. Not having one costs at the worst possible moment.

We pull it. You don’t have to think about it.

What Is the Pressure Test, and Why Should You Care?

This is the step that separates gas work from almost everything else in a house, and it’s genuinely satisfying to watch.

Before a new line ever sees gas, it gets sealed and pressurized with air, and a gauge goes on it. Under NFPA 54, the test runs at no less than 3 psi and has to hold for a minimum of 10 minutes. Plenty of cities require more. Dallas, for example, requires 3 psig held for 15 minutes on an approved gauge with the inspector watching. So the honest answer for our area is typically 3 psi held for at least 10 to 15 minutes, depending on your city.

The needle either moves or it doesn’t. There’s no interpretation, no judgment call, no “looks good to me.” A pinhole that a person could never see or smell will show up on that gauge as a slow drift, and the line doesn’t go into service until it holds flat.

That’s the reason we’re comfortable working on gas the same way we’re comfortable putting a camera down a sewer line before we dig. We find it first, then fix it once. Guessing isn’t part of it.

Natural Gas or Propane? What Being Certified in LPG Means Out Here

Most homes inside Prosper, Frisco, Plano, McKinney, and Allen are on natural gas from the utility. Once you get out toward the acreage lots, and there’s plenty of that around Celina, Melissa, Anna, and the edges of Prosper, you’re often on propane instead.

They’re not interchangeable. Propane runs at different pressure, needs different orifices in the appliance, and is regulated by an entirely different agency. In Texas, LP gas falls under the Railroad Commission of Texas rather than the plumbing board, and a licensed plumber has to file a separate registration with the RRC to work on LP gas piping and appliances.

Crown is certified in LPG. In practice, that means we can run the line whether your fire pit is fed by a utility meter or a tank in the side yard, and we can convert appliances between fuels correctly instead of leaving you to find a second contractor.

If you’re on a lot with no gas main and you’ve been told a gas fire pit isn’t an option, that’s worth a second opinion.

How Do I Know If I Have a Gas Leak?

Calmly and with your senses. Atmos Energy, the gas utility for this area, puts it as: smell, listen, look.

Smell: Natural gas has no odor of its own, so a sulfur or rotten egg scent is added specifically so you’ll notice it. If you smell it, believe it.

Listen: A hiss, a whistle, or a roaring sound near a gas line, a meter, or an appliance connection.

Look: A damaged connection, a blowing or bubbling patch in standing water, or dirt and dust blowing up from the ground near a buried line with no wind to explain it.

Some other things worth paying attention to, though they’re less definitive: a pilot light that keeps going out, a burner flame that’s yellow or orange instead of steady blue, or soot around an appliance. Those point to combustion problems more often than to a line leak, and they’re still worth a call.

What Should I Do First If I Smell Gas?

Leave. That’s the first step, and it isn’t negotiable.

Get everyone out of the house or away from the area. Don’t flip light switches, don’t start a car in the garage, don’t use your phone until you’re outside and away, and don’t go hunting for the source.

From a safe distance, call 911 and call Atmos Energy at 866-322-8667. Their emergency line runs 24 hours. Don’t assume a neighbor already reported it.

Once the utility has made the area safe, that’s when a plumber comes in. Call us at (972) 346-2332, and we’ll find the leak, verify the rest of the system, and repair it properly. The order matters: utility first, us second.

Gas Leak Detection and Repair: What We Actually Do

Same philosophy we bring to a slab leak. Find it first, then fix it once.

We isolate sections of the system and pressure test them to narrow down where the loss is happening, rather than opening up walls on a hunch. We check every joint and connection with a leak detection solution or an electronic detector. We look at the appliance connectors, which are a common failure point and an easy one to miss, and at the shutoff valves, which seize up more often than people realize.

Then we repair the actual problem. Sometimes that’s a fitting. Sometimes it’s a section of old pipe that’s corroded from the outside in. Sometimes it’s a connector somebody kinked behind a dryer in 2014. And when the repair’s done, the system gets pressure tested again, because a repair that hasn’t been tested is just an opinion.

Gas line repair is in our booking form as its own service, right alongside BBQ line install. You can pick it directly at crownplumbingservice.com/schedule-service.

Carbon Monoxide, Plainly

We’re not going to dress this up or lean on it. Here are the facts and what to do about them.

Carbon monoxide is colorless and odorless, and it comes from incomplete combustion, so it’s a byproduct of appliances that burn fuel rather than of a gas leak itself. The Consumer Product Safety Commission puts non-fire carbon monoxide deaths in the United States at an average of 238 a year across 2020 through 2022. In 2022, heating systems accounted for 68 of them, ranges and ovens for 10, and water heaters for 5.

What to do: put a carbon monoxide alarm on every level of the house and near the bedrooms, test them when the time changes in November, and replace them at the interval the manufacturer prints on the back, because the sensors expire. Never run a grill, a generator, or any unvented combustion appliance in a garage or an enclosed patio. And when your furnace comes on for the first time this fall, if you get headaches, dizziness, or nausea that clear up when you leave the house, treat that seriously and get out.

If an alarm sounds, get outside and call 911.

Commercial Gas Lines Before the Fourth Quarter

Fourth quarter is when restaurants make their year, and it’s a rough time to discover a gas problem.

Crown works on commercial gas, including restaurant equipment and commercial-grade appliances. That covers new lines for added equipment, replacements and upgrades to existing piping, leak detection, and repair. We also handle the rest of the commercial plumbing picture: commercial service includes commercial water heaters, recirculation systems, booster pumps, three-compartment sinks, floor sinks, grease-prone drain lines, backflow testing, high-pressure water jet drain cleaning, sewer video inspections, and preventative maintenance plans.

For a restaurant or a small business in Prosper, Celina, McKinney, Frisco, or anywhere in Collin County, September and early October are the windows. Adding a line for new equipment, upgrading capacity before a busy season, or getting an existing system verified is a scheduled job right now. In late November, it’s an emergency, and it costs a day of service.

Property managers, same story. If you’ve got tenant spaces with gas appliances, the pre-heating-season walkthrough is cheap insurance. Schedule a commercial gas line assessment at (972) 346-2332.

Your Fall Gas and Plumbing Checklist

Nothing here takes long. Print it, screenshot it, or just keep it in the back of your mind.

September, while it’s still warm

• Decide on the backyard project now if you want it usable this season. Permits and inspections take time, and so does a patio contractor’s schedule.
• Locate your main gas shutoff at the meter and make sure the handle turns. If you’ve never touched it, this is the month.
• Find the individual shutoff valves at your water heater, furnace, range, and dryer.
• Look at your water heater’s age. If it’s past ten years, plan the replacement instead of waiting for it.
• Test your carbon monoxide alarms and check the expiration date on the back.

October, as the front arrives

• Run the furnace for fifteen minutes on a mild day, before you need it, and pay attention to any smell or noise.
• Look at the burner flame on your gas appliances. Steady blue is what you want.
• Disconnect and drain the garden hoses once the nights start dropping.
• Get any gas connector that looks corroded or kinked before the first cold snap.

Before Thanksgiving

• Get the drains handled. The day after Thanksgiving is the busiest day of the year for plumbers nationally, with service calls jumping around 50 percent, and it’s almost always grease and food scraps. If a drain in your house has been slow all fall, deal with it in October. Our drain cleaning and repair and hydro-jetting pages cover what that looks like.
• Test the fire pit and the outdoor heaters once before the first party, not during it.
• Save our number. (972) 346-2332.

We Pull the Permit, and We Pull the Gauge

There’s a version of this work that’s faster. Skip the permit, skip the load calculation, run the pipe, light it, take the check. It happens, and the homeowner usually has no way to know.

We’re not built that way. The permit goes in, the inspector comes out, the gauge goes on, and the needle has to hold flat before anything gets buried or covered. Our price doesn’t change between the estimate and the invoice, so there’s no incentive on our end to cut a step and no surprise on yours.

It’s the same approach we take everywhere else. On a hidden water leak, we bring video inspection equipment instead of a shovel. On gas, we bring a gauge instead of an opinion.

Why 973 Reviews Matter When Someone’s Working on Your Gas

Reviews matter more on some jobs than others. A faucet either drips or it doesn’t, and you’ll know within a day.

Gas work is different because most of it ends up behind a wall or under a yard where you’ll never see it again. What you’re actually buying is whether the crew did the parts you can’t check. The pressure test they ran when nobody was watching. The bonding clamp in the attic. The sediment trap where code required one.

Crown holds a 4.9-star rating across 957 reviews, built since 2006 by people in this area who had no way to verify the invisible parts either, and who kept calling back anyway. That’s the strongest evidence we can offer you. We’d be glad to earn your review too.

Proudly Serving Prosper and the Neighbors

We proudly serve Prosper, Celina, McKinney, Frisco, Allen, Plano, Fairview, Little Elm, Melissa, and Anna, along with the surrounding North Texas and Collin County communities.

That range matters on gas work specifically, because the rules shift as you cross city lines. Frisco is on a newer code edition than some of its neighbors. Permit processes differ. And the further out you get toward Celina, Melissa, and Anna, the more likely you are to be on propane instead of a utility meter, which is a different license and a different install. We work across all of it, which means you don’t have to figure out which set of rules your address falls under.

What to Expect When You Call Crown Plumbing

You’ll get a person. We’re family-owned, our office runs Monday through Friday from 8:00 AM to 5:00 PM, and you can also book online at crownplumbingservice.com any hour you like.

We’ll ask what’s going on and what you’re hoping to add. We’ll set a window that works for you. A technician comes out, looks at the meter and the route, does the gas load math, and gives you a fixed price in plain language. If the answer is that your system needs an upsize or a meter upgrade first, we’ll say that, even though it’s the less fun answer.

The estimate is free and there’s no obligation on it. If you want to think about it, think about it. If you want to book it, we’ll pull the permit and get you on the schedule.

Meet Crown Plumbing: Your Neighbors Since 2006

Crown Plumbing is a family-run business based right here in Prosper, and we’ve been doing this in Collin County since 2006. Nineteen years in one area is long enough to know which neighborhoods have which quirks and long enough that the reputation is the business.

We’re fully licensed and insured under License # M-37627, and we’re certified in LPG, which is the credential that lets us handle propane as well as natural gas. We work residential and commercial. Our whole approach comes down to diagnosing before recommending, quoting a price that doesn’t move, and doing the job once.

No pressure and no scare tactics. If you don’t need it, we’ll tell you that.

What Our Prosper Neighbors Are Saying

“Nicholas was great! He came in and diagnosed the issue immediately and fixed everything. Very honest about what might need to happen.” (Verified Google Review)

“James and his partner did a great job with a list of plumbing items. They were professional and courteous.” (Verified Google Review)

“Very prompt service and reasonably priced. I called for a leak in my kitchen sink pipes, and they came out w/in an hour.” (Verified Google Review)

“Crown Plumbing and Jacob did a great job on our sewer for us! They were very responsive and explained the issue well.” (Verified Google Review)

How Do I Get Started?

If you’ve been thinking about the fire pit for two summers, or the grill died mid-cookout again, or the pool heater is the thing standing between you and October swimming, the next step is a free estimate. We’ll come out, do the gas math, and tell you plainly whether it works and what it costs. If your system needs something else first, we’ll say that too.

Call Crown Plumbing at (972) 346-2332 or schedule at crownplumbingservice.com. Family-owned in Prosper since 2006, licensed and insured (License # M-37627), certified in LPG, and rated 4.9 stars across 957 reviews. Permit to flame, no pressure, and a gauge that has to hold flat before we call it done.